Tripmeister is a rally trip computer. It measures distance, speed, heading and altitude while you drive. This policy describes exactly what happens to that data.
Short version
Tripmeister has no account, no server and no analytics. Everything it records stays on your iPhone — and on your own iPad, if you pair the two — unless you explicitly choose to upload a stage to your own Strava account, or switch on live sharing, which sends your position encrypted so that only the people you give the link to can read it.
What the app records
To work as a trip computer, Tripmeister uses:
Location (GPS). Position, speed, heading and altitude, sampled while a rally stage is running. This is what produces the odometers, average speed and regularity timing.
Motion sensors. The barometer and magnetometer, used to stabilise the altitude reading and to show a compass heading at low speed.
Your rally data. Rallies, stages, roadbook instructions, waypoints, recorded tracks and settings that you create in the app.
The share image of your driving day. When you finish a day, the app can draw a picture of it — the route as a line on a grid, your distance, time and stage results, the altitude profile — and, if you choose one, put a photo from your library behind it. The picture is drawn on your iPhone. "Save image" adds it to your photo library with add-only access (the app cannot see your other photos), and "Hide start & finish" cuts 500 m off each end of the route so your home or hotel is not on it. You can also put your door number and the organizer's logo on the picture. The number and the logo (a shrunken copy of the file you pick) are kept in the app's private storage for that rally, and can be removed in the same screen. A background picture you choose is only held while the screen is open.
Photographs of roadbook pages. If you scan a paper roadbook, the app uses the camera, your photo library or a PDF you choose to photograph the pages, and reads them on your iPhone with Apple's own text recognition. The pages and the small crops of each box are stored in the app's private storage; the full pages are discarded once you accept a scan unless you choose to keep them, and you can delete a scan at any time, with the amount of storage it frees shown first. No page, crop or recognised text is ever sent anywhere — you can scan a page in airplane mode and it works the same.
Apple Watch. The watch shows the figures of your own iPhone, or of your own iPad over Bluetooth once you have paired the two with a code shown on the iPad. That link is encrypted and talks to no other device. If you start a session on the watch, it reads your heart rate to show it on the watch; the heart rate stays on the watch and is written to Apple Health only if you switch on "Save to Health".
GoPro and music. If you pair a GoPro camera, the app (or your rally box) talks to it directly over Bluetooth to start and stop recording, tag highlights, change its mode and settings, and set its clock; it reads the camera's battery, recording and card status, its temperature warnings, its mode and settings, its model, firmware and serial number, and the name of the last file it recorded, and nothing else. The names you give your cameras stay on the phone. If you set up a livestream, the app keeps your hotspot's password and your stream key in the iPhone's Keychain and sends them to the camera over Bluetooth; the camera then streams straight to your own channel on the streaming service you chose. A video you pick for the overlay is read and written again on your device only. The music controls read the title of the track playing in the Music app to show it on screen. Neither leaves your device.
Where it is stored
All of it is stored locally on your device, in the app's private storage. There is no Tripmeister account and no Tripmeister server. We — the developer — never receive your location, your tracks or your rally data.
If you have iPhone backups enabled, this data may be included in your own iCloud or computer backup, under your control and Apple's terms.
If you pair your iPhone with your iPad, the same data is also stored on the iPad, in the same way, and the two keep each other up to date (see below).
When data leaves your device
There are exactly five cases, and all are something you do: you connect Strava and upload a stage, you share an image or a GPX file of your day with the iOS share sheet, you look at the map or ask for directions to an address, you pair your iPhone with your iPad, or you switch on live sharing. Nothing else leaves the device.
Your own iPhone and iPad. Pairing is optional and off until you do it: one device shows a six-digit code and you type it on the other. From then on the two find each other when they are near and connect directly — over Wi-Fi or Apple's peer-to-peer Wi-Fi, with no internet and no server of ours or anyone else's in between. Everything they exchange is encrypted with a key only the two paired devices hold. They exchange your rallies, stages, roadbooks and scanned pages, recorded tracks, results and settings, and — while one of them is driving a stage — its live trip figures and position, so the other can show them. If you connected Strava, the Strava login (kept in the Keychain on each device) is exchanged too, so either device can upload. Tile and screen layouts and the link to a rally box are not exchanged. Settings → iPhone and iPad → Forget this device stops it; what was already exchanged stays on both devices until you delete it.
Sharing a day. The share sheet hands the picture, or the GPX file, to the app you pick — Messages, Instagram, Mail, Files, AirDrop. Tripmeister does not see which one, does not send anything itself, and has no copy afterwards. What the app you pick does with it is governed by that app's own policy.
The map and navigation. The map's imagery is downloaded from Apple Maps. When you search for a place or start navigation to an address, the text you type, the destination and your current position are sent to Apple's MapKit services to find the place and the route. Tripmeister has no server of its own and keeps no copy; recent destinations stay on your iPhone and can be removed in the destination list. What Apple does with the request is governed by Apple's privacy policy.
Live sharing. Off until you switch it on for a rally, or join a friends group with it. While a stage of that rally is running and not paused, your iPhone sends your position about every 10 seconds on a charger and every minute on battery, with the parts you leave switched on: your speed, altitude, the stage name and distance, the next roadbook box, your crew name, door number and organizer logo, and distance and time per day. A switch that is off sends nothing. Between stages, and while a stage is paused, only where the car is standing is sent: once, again when it has moved about 100 m, and otherwise every five minutes, so your friends can tell a parked car from one that stopped sharing. No trail and no speed is sent then.
Everything is encrypted on your iPhone with a key that exists only in the link, after the "#". Browsers never send that part of a link to any server.
The encrypted data is kept in Apple's iCloud (the public CloudKit database of the Tripmeister app) so that the link works in a browser. Apple stores it and cannot read it, and neither can we. Sharing needs your iPhone signed in to iCloud; Tripmeister still has no account of its own.
Anyone you give the link to can see what you share, live and as a replay, until you make a new link or tap Stop sharing and delete the link, which deletes what it stored. Deleting the rally deletes it as well.
In a friends group, everyone who has the group code sees your car on their map while you share. You can stay in a group and only watch.
The viewer page loads Apple's map (MapKit JS) to draw the map, under Apple's privacy policy. It sets no cookies and runs no analytics.
Live video. If you stream a GoPro to your own YouTube or Twitch channel and switch on showing the stream on the live page, then while a stage runs the share names that YouTube video or channel or that Twitch channel, and the link's page offers it as a player. The stream goes from the camera straight to the service, under its own terms and privacy policy (YouTube's terms and Google's privacy policy; Twitch's privacy notice); Tripmeister never receives it. The page loads nothing from either service until a viewer presses play. Then it loads YouTube's player from youtube-nocookie.com or Twitch's from player.twitch.tv, which sees the viewer's IP address and that the player was opened from this site.
Strava.
Connecting Strava is optional and off by default.
When you tap to sync a stage, that stage's GPS track and its title and description are sent to Strava, to your own account.
Nothing is uploaded automatically. Each upload is an explicit action.
Your Strava login tokens are stored in the iOS Keychain on your device, and can be removed at any time with Settings → Strava → Disconnect.
No analytics, telemetry or crash-reporting services
No advertising and no advertising identifiers
No tracking across other apps or websites
No third-party SDKs — the app uses only Apple frameworks, including for reading scanned roadbook pages
Your data is never sold, and never shared with anyone except by you, through Strava, the share sheet or live sharing as described above
Your control
Location access can be changed or revoked at any time in iOS Settings → Privacy & Security → Location Services → Tripmeister. Without it the app cannot measure distance or speed.
Deleting a rally in the app deletes its stages, tracks and events; deleting a scanned roadbook deletes its pages and crops. The app shows what will be removed before you confirm.
Deleting the app removes all Tripmeister data from your device.
The website waitlist
The waitlist form on tripmeister-site.pages.dev is the one place this project stores anything off your device. If you submit it, we keep your email address, whether you ticked the hardware box, the date you first signed up, the date of your most recent submission if you sign up more than once, and the country code Cloudflare attaches to the request. It is used only to email you about the beta and the hardware, and it is never sold.
To send you a TestFlight invite the address is entered into Apple's App Store Connect, because that is how Apple delivers the invite — Apple is the only third party it reaches. A reply asking to be removed deletes it. Not submitting the form stores nothing — the app itself never contacts us.
So the form cannot be used to write junk, the endpoint also counts recent submissions per internet connection. What it stores for that is a salted, shortened fingerprint of the IP address — not the address itself, and not attached to your email — under an entry that deletes itself within ten minutes. Your IP address is never written down.
Children
Tripmeister is a tool for drivers and is not directed at children.
Contact
Questions about this policy: lorenz@bohlander.de
If you are in the EU/EEA, the legal basis for processing your location is your consent, given through the iOS permission prompt, and it is processed solely on your device to provide the app's core function.